Pisector GSM + PS03-M + PS03-S Professional Wireless Home Security Alarm System Kit Review

Be sure to check out the list of other DIY Home Security Systems to see what is best for you.

Last Updated 6/20/2016

Pisector GSM + PS03-M + PS03-S Professional Wireless Home Security Alarm System Kits are systems that are offered at an affordable cost for most individuals (see lowest price).

It is an entirely self-monitoring system, meaning that there are no monthly fees due to lack of professional monitoring. It VOIP up to six numbers when it sounds the alarm locally and discovers a security incident or phones out using your landline. You may also call in to listen to what exactly is happening at home and arm or disarm the system.

Best Pisector Home Security Review

The system communicates wirelessly, so there are not any cables to run through the walls, and no drilling is needed to attach the sensors to your walls meaning it is good for owners along with renters. Pre-configured sensors come with the unit, so there is not much particular set up required. It will also not interfere with your WIFI, unlike many other units.

Key Features

  • Wireless Outdoor Siren – this is not 140 dB soft to notify neighborhood and can be mounted outside but not right in the weather
  • PiSeector Window signs Stickers
  • PiSector Lawn Sign Panel
  • Windows & Door Sensors – the entrance points are secured by these into the house or company.
  • Panic Button – when that is pressed on the system is activated forthwith, and notification is sent out immediately
  • Movement Detectors – these motion sensors detect movement in a space and are for the motive that creatures under 50 lbs usually will not be discovered pet immune
  • Wired Indoor Siren is direct into the control panel and – this is not 85 dB soft
  • Remote Controllers – arm/disarm the system and press the SOS button within an emergency to ensure a notification is sent out immediately

System Includes

  • 1 Main console
  • 2 Remote Controllers
  • 3 Intelligent Motion Sensor
  • 10 Door & Windows Sensors
  • 1 Wireless Indoor Siren
  • 1 Wireless Outdoor Siren
  • 1 Panic Button
  • 2 PiSECTOR Window Sign Stickers
  • 1 PiSECTOR Yard Sign Board

Technical

  • Motion sensor range to main unit 300ft , detection range 25-35ft open area, Vertical: 60°, Horizontal: 110°
  • AC/DC adapter, Input 100V-240V, Output 12V 1.2A
  • Motion sensors use 3V CR123A battery with an LED light to indicate if battery is low.
  • Door sensor use 3V CR2450 battery with an LED light to indicate if battery is low.
  • Wireless communication frequency: 433MHz +/-0.5MHz
  • Door sensor to main unit wireless range 200ft

Strengths 

  • Customer care is responsive, and issues and queries are dealt with quickly
  • Setup is straightforward and can be done by the homeowner without special technical skills or DIY skills needed
  • To immediately identify the one that activated the alarm you record by voice and can rename the new name of the detectors
  • VOIP can be used instead of landline
  • It is possible to arm in-house or away modes
  • Can set up to 6 phone numbers to be contacted when alarm is tripped
  • You get a lot of sensors for the price, and there are no contract and no ongoing fees
  • Becauce it is wireless, it simple to take with you when you move or need to set up it in a new place
  • When the system phones you, it tells you the name of the sensor which was activated





Weakness

  • You cannot add cameras to the system
  • You will need to screw or glue the sensors because the double sided tape contained is not strong enough to keep detectors in place
  • You may only get small home insurers mark down as it is self-tracked
  • You can't monitor or control from a computer.
  • There is only one password, so you can’t give out a temporary password to workers or a babysitter or guests as it is used for arming/disarming and programming the system
  • There is absolutely no duress code that switches off the sirens but the system continues dialing outside
  • There is no LED light if system is equipped that goes dim when not in use and you can only see that on the LED screen to tell you
  • The outside siren doesn't function when there's a power outage and must be installed near a power outlet
  • The internal alarm is connected to the control panel, and this can alert the burglar to where the control panel is so they can ruin it
  • It is used by can’t within a house bundle that is smart as it is incompatible with Z-Wave or ZigBee.

Overview

Weight

0.71875 lb PS03-S
5.8 lb PS03-M
6 lb GSM

Ergonomics

Ergonomics

Durability

Durability

Maintenance

Maintenance

Reliability

Reliability

Upgrades Available 

Availability

Who Is This For?

All the Pisector systems (PS03-S, PS03-M, and GSM) are DIY systems that incorporate competitive pricing. There are many features that we went over and many functionality.

However, who is this for?

Having this system for just over a month, we came to the conclusion that this would be perfect for vacation homes or rental property that you may have. It does lack some degree of reliability and its quality does make us question its durability, however, if you are in need of some deterrent for your properties, this system is ideal for you.

Its lack of features such as video monitoring is significant since other will be on the property, and the ability to add multiple phone via VIOP allows you to keep up to date with what your tenants or short term rentals are up too.

Packages

PiSector Home Security

PS03-S

PS03-M

GSM

Type

Wireless 

Wireless 

Wireless 

Connection

VOIP or Landline

VOIP or Landline

VOIP or Landline

Sensors 

Yes

Yes

Yes

Sirens

Indoor Only

Yes

Yes

Remote Monitoring

Limited- one phone only

Limited- one phone only

Limited- one phone only

Smartphone App

No

No

No

Max Devices to be Added

N/A

<25

50

Contracts 

No

No

No

Hidden Fees

No

No

No

Camera Integration

No

No

No

Be sure to check out the list of other DIY Home Security Systems to see what is best for you.